A natural citrus-based degreaser for use with new or used screen mesh. This product will clean the fabric by removing oils, contaminants, and residue that would ruin the emulsion coating. Enviroclean will also reduce the incidence of "pinholes" when coating your screens with emulsion. It also helps control hard water and other contaminants found in the rinse water.

1. Prior to using, remove any ink or emulsion reidue left on the screen.
2. Apply Enviroclean to both sides of the screen. Thoroughly scrub and agitate the mesh completely. Leave on mesh 1-2 minutes to allow the product to dissolve all contaminants.
3. Thoroughly rinse both sides of the screen with water.

Ships from Canada.  The Screen Print Store.ca is Canada's source for screenprint ink, screen print supplies, screenprinting equipment and all your silkscreen needs.