This product is a medium viscosity, water soluble red blockout designed to fill the open areas of the screen not covered by the emulsion.

1.When the screen is dry and free of contaminants, pour RED-COAT on the print side of the screen. Spread over the open areas of the screen until completely filled.

2.  Touch up all defects, including heavy blobs which tend to dry the outside and pop off or smear during printing. Where very fine meshes are used, you may reduce the viscosity by adding a little water.

3. Remove blockout with water.

Ships from Canada.  The Screen Print Store.ca is Canada's source for screenprint ink, screen print supplies, screenprinting equipment and all your silkscreen needs.