D-White Discharge Ink is an extremely bright white water-base discharge ink. Suitable fabrics are easily discharged producing an extremely soft hand. EnviroLine® D-White can be used as a highlight white or can be used with pigments. EnviroLine® D-White can be used in conjunction with other ink systems to produce multiple effects. EnviroLine® D-White’s rheology and flow characteristics allow it to be printed with high mesh counts. This produces very fine image detail and a softer finish.

Product Details

• Exceptionally soft hand
• Low odor
• PVC and Phthalate free
• Easy clean-up
• Slower dry time in screen
• Recommended Mesh: 160 - 305

Preparation

Screens must be prepared with water-resistant emulsion to prevent stencil breakdown on press. Post-hardening the stencil is recommended for long print runs. Stir in 3-6% by weight, D-Powder Discharge Activator and mix well. Different percentages of the activator will yield different results. Mix only enough for current production requirements. Activated D-Base should be used within 8 hours of mixing. If using CMS pigments, you can add 1-10% pigment to the base depending on desired shade. D-Base may be thinned with water if a lower viscosity is required, up to 10% max.